Lifting Instructions - Johnson Controls SABROE ChillPAC Installation Manual

Chiller/heat pump unit with reciprocating compressor

Hide thumbs Also See for SABROE ChillPAC:

Table of Contents

Installation guide

Lifting instructions

Fig. 1

Before lifting the unit, make sure that straps/chains are properly secured to lifting eyes/shackles and that

the lifting equipment is in good condition. Also make sure that the lifting capacity of the crane and the

loading capacity of chains, straps, lifting eyes and shackles as a minimum correspond to the total weight

of the unit.

•

When lifting the unit, please use the lifting devices on the base frame.

•

It is recommended to use a yoke; this will protect the components and the insulation.

•

The unit must not be lifted in the lifting devices on the compressor block and motor.

Installation guide - ChillPAC and HeatPAC

006616 en 2021.10

3/7

Table of Contents

Do you have a question about the SABROE ChillPAC and is the answer not in the manual?

Sabroe heatpac