Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crystal Vision HDDA105 Series
Summary of Contents for Crystal Vision HDDA105 Series
- Page 1 HDDA105 and HDDA111 HD/SDI Distribution Amplifiers Crystal Vision Ltd., Lion Technology Park, Station Road East, Whittlesford, Cambridge, CB22 4WL, England. E-mail: sales@crystalvision.tv Website: www.crystalvision.tv Tel: +44(0) 1223 497049 Fax: +44(0) 1223 497059...
-
Page 2: Table Of Contents
Crystal Vision HDDA105/111 User Manual R1.0 Contents 1 Introduction 2 Hardware installation 2.1 Universal rear connectors Rear module connections with RM34 2.2 General purpose interface 2U frame GPI Connections 1U frame GPI connections DTB GPI connections 3 Card edge operation... -
Page 3: Introduction
140 meters for HD with Belden 1694 or equivalent is obtainable. The universal connection system allows a mixture of Crystal Vision modules in the frame. The modules plug in the front and the rear connectors plug in the rear. Depending on frame design, a hinged or removable front panel reveals LED and switch positions as an indication of input present, HD/SD and PSU status when opened. -
Page 4: Hardware Installation
Crystal Vision Hardware installation 2 Hardware installation The HDDA105/111 digital video distribution amplifiers fit into all Crystal Vision rack frames. All modules can be plugged in and removed while the frame is powered without damage. 2.1 Universal rear connectors The HDDA105C and HDDA105NA use a single height rear connector, this will allow the 4U Indigo frame to house up to 24 modules and three power supplies, the 2U Indigo 2 frame will house 12 modules and dual power supplies. - Page 5 Crystal Vision Hardware installation HDDA111C/HDDA111NA RM34 fits in all frames Description RM34 x 2 • 12 modules in 4U • 6 in 2U • 3 in 1U • 1 in a DTB • 2 slots used for each card I/O assignment...
-
Page 6: General Purpose Interface
Crystal Vision Hardware installation 2.2 General purpose interface The external GPI control lines 'a' to 'f' at the frame remote connectors are provided to allow remote control and/or remote status indication. Line 'a' is assigned as a GPI output to provide remote indication of input presence. -
Page 7: Frame Gpi Connections
Crystal Vision Hardware installation 1U frame GPI connections GPI lines ‘a’ to ‘f’ of each card connect to one of two rear remote connectors as follows: Slot no. ‘a’ pin ‘b’ pin ‘c’ pin ‘d’ pin ‘e’ pin ‘f’ pin... -
Page 8: Card Edge Operation
Crystal Vision Card edge operation 3 Card edge operation HDDA105C/HDDA111C The front card-edge of the HDDA105C/HDDA111C provides power rail monitoring and signal status. HDDA105C front edge view Location/colour Meaning when lit HD-SD Green Valid input and standard detected. PSU Ok Green Power supply voltages present. -
Page 9: Trouble Shooting
Crystal Vision Trouble shooting 4 Trouble shooting Card edge monitoring The card edge provides simple monitoring of the board status. This can be used as an initial aid to trouble shooting. Fault finding guide The Power OK LEDs are not illuminated Check that the frame PSU is functioning –... -
Page 10: Specification
Crystal Vision Specification 5 Specification General Dimensions 100mm x 266 mm module with DIN 41612 connector Weight HDDA105 140g HDDA111 200g Power consumption HDDA105C 3.2W HDDA111C 5.6W HDDA105NA 2.8W HDDA111NA 5.2W Inputs Video HD or SD SDI 270Mb/s to 1.485Gb/s serial digital compliant to... - Page 11 Crystal Vision Specification Ordering information HDDA105C 1 in 5 out multi-standard reclocking distribution amplifier HDDA111C 1 in 11 out multi-standard reclocking distribution amplifier HDDA105NA 1 in 5 out multi-standard non-reclocking distribution amplifier HDDA111NA 1 in 11 out multi-standard non-reclocking distribution amplifier...
Need help?
Do you have a question about the HDDA105 Series and is the answer not in the manual?
Questions and answers