Sf-Hdl-Timber Log Installation; Glass Front Removal - SimpliFire ShadowGlo SF-HDL-TIMBER Instructions

SF-HDL-BIRCH Kit includes:
LOG
LOG
REFERENCE
QTY
LETTER
A 1
B 1
C 1
D 1
E 2
F 1
A B
C
Figure 2 SF-HDL-BIRCH Log Set

SF-HDL-TIMBER Log Installation

Note: Log placement examples below are variable and may be changed based on your desired look. The
number of logs needed will vary depending on the length of your fireplace.
1. Take the logs with significant char and position them inside the firebox with the unpainted portion facing down (allowing
the fuel bed light to shine through) as shown in Figure 3.
Figure 3. Place Small Logs
2 SimpliFire • SF-HDL-BIRCH, SF-HDL-TIMBER Log Instructions • 2043-950 Rev. B • 9/20
LOG
LOG
REFERENCE
QTY
LETTER
G 1
H 1
I 1
J 1
K 2
L 2
F
E
E
G
D

Glass Front Removal

Refer to the appliance Owner's Manual for instructions
to remove and install glass front.
CAUTION! Two adults recommended for the removal
or installation of glass front. Use caution when han-
dling glass. Failure to do so could result in personal injury
or property damage.
H
J
I
K K
L
L