Table of Contents
Advertisement
CONTROL SWITCHES / IGNITION SWITCH / HEADLIGHT /SIDE STAND INFORMATION
Cranking ON & OFF Control
"Cranking ON and OFF duration" control:
• During Engine crank cycle cranking is allowed only for fixed duration and in between successive cranks (in case
engine does not start) here is a cooling off period.
• Cranking on-off duration control feature to avoid battery discharge-
- 1st Crank ON (5 sec) & Disable for 2 sec.
- 2nd Crank ON (5 sec) & Disable for 2 sec.
- 3rd Crank ON (5 sec) & Disable for 10 sec.
After a gap of 10 sec cranking cycle continues.
Fuel Tank Cap
SOP to prevent fuel stains on petrol tank
• After petrol refilling & before shutting the cap wipe the
spilled petrol from the painted areas around the cap by soft
dry cotton cloth.
• Shut and lock the cap fully.
Service Station Manual
• This practice needs to be followed to maintain the shine
of color on petrol tank.
Glossy Finish Painted Parts Cleaning
Do's:
·
Use Colin or caustic free detergent solution for
cleaning.(1 spoon in ½ bucket)
Remove foreign substances like insect remains, road
debris using a soft brush.
·
Use microfiber cleaning cloths Ex.- Muslin cloth for
painted parts cleaning.
·
Use recommended 3M polish.
Don'ts:
·
Do not use products that are even mildly abrasive, such
as polishes, glazes, or rubbing compounds.
·
Do not use mechanical cleaners/polishers.
·
Do not use terrycloth or paper towels or shine
enhancement products.
·
Do not rub the finish vigorously, this will burnish the
paint finish, causing a permanent shiny spot. Shiny
spots cannot be removed.
31
Service Support - M/C
Hide quick links:
Advertisement
Table of Contents
