Table of Contents
Advertisement
GENERAL INFORMATION
Oil Seal, Grease Seal
Do not remove pressed oil or grease seals unless removal is
necessary. Replace with new ones whenever removed. Press
new oil seals with manufacture and size marks facing out.
Make sure the seal is aligned properly when installing.
Apply specified grease to the lip of seal before installing the
seal.
Lubrication
It is most important to lubricate rotating or sliding parts during
assembly to minimize wear during initial operation. Apply the
specific oil or grease as specified.
Direction of Engine Rotation
When rotating the crankshaft by hand, the free play amount of
rotating direction will affect the adjustment. Rotate the
crankshaft to positive direction (clockwise viewed from clutch
cover side).
Instrument
Use a meter that has enough accuracy for an accurate
measurement. Read the manufacturer's instructions
thoroughly before using the meter. Incorrect values may lead
to improper adjustments.
Service Support - M/C
8
Service Station Manual
Hide quick links:
Advertisement
Table of Contents
