VeriFone UX301 Installation Manual page 5

S
ETUP
Cable Connections
Connecting to a
UX-Series
Peripheral Device
To connect the UX301
to the UX401 CTLS
18
UX301 I
NSTALLATION
This section discusses the connection of the UX301 device with the following
peripheral units:
•
Connecting to a UX1xx Series PIN Pad
•
Connecting to a UX401 CTLS Unit
Connecting to a UX1xx Series PIN Pad
You can connect the UX301 to a UX1xx-series PIN pad device with a standard
USB Type A to B cable (VPN CBL000-045-01-A).
Figure 8 Connecting to a UX110 PIN Pad
Connect the Type A plug in the UX301 high-powered port and connect the type B
plug to the USB port of the UX110.
Use the same procedure for connecting to other UX1xx-series PIN pads.
The UX301 host device installs the USB device driver automatically. The USB
data will be encrypted with authentication upon startup.
Connecting to a UX401 CTLS Unit
You can connect the UX301 to a UX401 unit using a communication cable (VPN
CBL159-313-02-A) and an SMA / analog RF cable (VPN CBL159-302-03-A).
1
Attach one end of the comm cable to the UX301 and the other end to the
UX401.
unit
2
Attach one end of the SMA cable to the UX301 and the other end to theUX401.
G
UIDE