VeriFone UX301 Installation Manual page 4

The I/O ports of the EUT are listed below:
8
SAM Card Slot
USB Port
Smart Card Slot
SMA port
RJ45 Port
LAN Port
Figure 7
9
Cable The UX301 rear panel holds several interface ports for power and
Connections
communications. Use this section to see how the UX301 connects to various UX-
series units, as well as other devices.
•
•
•
NOTE
To get the proper connection cables, please refer to
Documentation.
Connecting to a This section discusses the connection of the UX301 device with the following host
UX-Series Host
units:
Device
Connecting to a Vending Machine
You can connect the UX301 to a host vending machine (VM) with any of the
following connection types:
•
•
•
•
For more information regarding your card reader configuration and your cabling
needs, contact your local Verifone service provider. For cable ordering
information, see
Slide the cardholder cover back, locking it into place.
*3
*3
*1
*1
*2
*1
Replacing the SAM Cardholders
Install additional SAM cards in the available slots as necessary.
Connecting to a UX-Series Host Device
Connecting to a UX-Series Peripheral Device
Connecting Optional Devices
USB Type B
ETH (LAN)
COM (RS-232)
MDB
Accessories and
Accessories and
Documentation).
Cable Connections
UX301 I G
NSTALLATION UIDE
S
ETUP
17