2. Navigate to the Manual Control Settings screen and press the Clear Manual Overrides button.
3. Select an individual component that is in manual override and press the Auto button. Then
4. For manual override events that are active during Auto unit operation, press the Stop button
Display Preferences
Touch the Display Preferences button to open the associated screen
available options to display information on the TD7 screens are available. There are two pages on
this screen, accessed by using the arrow button at the bottom of the screen.
Figure 39. Display Preferences screen
Date Format
Touch the Date Format button to open the associated screen. Three options are available to display
the current date: MMDDYYYY, DDMMYYYY, and YYYYMMDD.
Date Separator
Touch the Data Separator button to open the associated screen. Five options are available to
display separators in the data format: None, Slash (/), Hyphen (-), Period (.), Underscore (_).
Time Format
Touch the Time Format button to open the associated screen. Two options are available: 12-Hour
format and 24-Hour format (also referred to as "military time").
Unit System
Touch the Unit System button to open the associated screen. Two options are available: SI (system
international) or Inch-Pound.
Pressure Units
Touch the Pressure Units button to open the associated screen.
RT-SVP011E-EN
press Apply.
at the TD7 display.
TD7 Display
(Figure
39). On this screen, all
61