Expansion Modules; Tgp2 Programs - Trane IntelliPak with Symbio 800 Programming Manual

Expansion Modules

Touch the Expansion Module button to view the Expansion Modules screen. If expansion modules
have been installed, they will appear in Expansion Modules screen
Figure 24. Expansion Modules screen
Expansion module screen columns:
Address — This is the rotary address of the defined or discovered expansion module.
Status — Under normal conditions, OK will display in this column. If not refer to "Tracer® XM30,
XM32, XM70, and XM90 Expansion Modules IOM," BAS SVX46-EN.
Hardware part number — This is the part number for the expansion module.
Software part number — This is the version number of the software running in the expansion
module.

TGP2 Programs

Touch the TGP2 Programs button to view the TGP2 Programs screen. All TGP2 programs that have
been installed on the controller appear here. The program name, status, run type, and interval for
each program is provided. Interval is the scheduled run interval for the program and is displayed
in HH:MM:SS. If the run type is Startup or Event, the interval field will display all zeros.
RT-SVP011E-EN
TD7 Display
(Figure 24).
27