Anolis ArcSource Submersible II User Manual

QR code for user manual

Version 1.8

Table of Contents

Need help?

Do you have a question about the ArcSource Submersible II and is the answer not in the manual?

Page 1 QR code for user manual Version 1.8...
Page 2 ArcSource Submersible II Table of contents 1. Introduction ........................3 2. Safety information ......................3 3. Mounting ......................... 3 4. ArcSource Submersible II connection with a control unit .......... 4 5. Technical specifications ....................5 6. Cleaning and maintenance ................... 6...
Page 3 . Use the Allen key no.6 to adjust desired tilt position of the LED module by means of two tilt locks (1). For fastening the ArcSource Submersible II to the flat surface use either three...
Page 4 +24V Ground Communication 4. ArcSource Submersible II connection with a control unit Maximum cable length between the ArcSource Submersible II and the SubDrive 1 (Subdrive 4) depends on the operating mode: Minimum mode: 100 m Medium mode: 50 m Maximum mode: 25 m...
Page 5 Operating Ambient Temperature: +1 °C / +45 °C (34 °F / +113 °F ) Operating Temperature: +55 °C @ Ambient +45 °C (+131 °F @ Ambient +113 °F ) OPTIONAL ACCESSORIES SubDrive 1 SubDrive 4 Floor Stand ArcSource 24 MC Submersible 5mm (P/N10980315) INCLUDED ITEMS ArcSource Submersible II User manual...
Page 6 DIMENSIONS mm [inch] ArcSource Submersible II 6. Cleaning and maintenance Disconnect from the mains before starting any maintenance work Maintenance and service operations are only to be carried out by a qualified person. Should you need any spare parts, please use genuine parts.