Redirect - D-Link DIR-842 User Manual

DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
User Manual

Redirect

On the Advanced / Redirect page, you can enable notifications on the reason of the Internet
connection failure. Notifications will be displayed in the browser window when a user is attempting
to open a web site on the Internet.
To configure notifications, click the ENABLE button. Then, in the Reasons for Redirect
section, move the needed switches to the right.
Parameter
Physical connection
error
The device is not
configured
No connection
When you have configured the parameters, click the APPLY button.
To disable notifications, click the DISABLE button.
Figure 116. The Advanced / Redirect page.
Reasons for Redirect
Notifications in case of physical connection problems (the ISP's
cable is not connected, an additional device needed to access the
Internet is not connected).
Notifications in case when the device works with default settings.
Notifications in case of problems of the default WAN connection
(authorization error, the IPS's server does not respond, etc.).
Page 150 of 210
Configuring via Web-based Interface
Description