D-Link DIR-842 User Manual page 165

DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
User Manual
To create a new tunnel, click the ADD button (
!
Setting for both devices which establish the tunnel should be the same.
Figure 128. The page for adding an IPsec tunnel. The General Settings section.
You can specify the following parameters:
Parameter
IP version
Dynamic IPsec
Remote host
General Settings
An IP version.
Move the switch to the right to allow a remote host with any public IP
address to connect to the router via IPsec protocol. Such a setting can
be specified for one tunnel only. Connection requests via this tunnel
can be sent by a remote host only.
A remote subnet VPN gateway IP address. The field is available, if the
Dynamic IPsec switch is moved to the left.
Page 165 of 210
Configuring via Web-based Interface
) in the Tunnels section.
Description