D-Link DIR-842 User Manual page 81

DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
User Manual
Parameter
Ping
RIP
Isolate connection
Figure 68. The page for creating a new Static IPv6 connection. The Ethernet section.
Parameter
MAC address
MTU
If the switch is moved to the right, the router responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
Move the switch to the right to allow using RIP for this connection.
If the switch is moved to the right, the router uses an alternate
routing table for this connection. Enable this function only when
your ISP requires this.
Ethernet
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
To set the router's MAC address, click the RESTORE DEFAULT
MAC ADDRESS button.
The maximum size of units transmitted by the interface.
Page 81 of 210
Configuring via Web-based Interface
Description
Description