DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
User Manual
IPsec
On the Advanced / IPsec page, you can configure VPN tunnels based on IPsec protocol.
IPsec is a protocol suite for securing IP communications.
To allow IPsec tunnels, move the Enable switch to the right. Upon that the Tunnels and Status
sections are displayed on the page.
If you want to log
all data on IPsec tunnel debugging, move the Debug switch to the right.
In the Status section, the current state of an existing tunnel is displayed.
Figure 127. The Advanced / IPsec page.
Page 164 of 210
Configuring via Web-based Interface