Table of Contents
Advertisement
DIR-615S Wireless N300 Router
User Manual
Redirect
On the Advanced / Redirect page, you can enable notifications on the reason of the Internet
connection failure. Notifications will be displayed in the browser window when a user is attempting
to open a web site on the Internet.
To configure notifications, select the Enable checkbox. Then select needed checkboxes in the
Reasons for redirect section.
Parameter
Physical connection
error
The device is not
configured
No connection
Firmware update
When you have configured the parameters, click the Apply button.
To disable notifications, deselect the Enable checkbox and click the Apply button.
Figure 111. The Advanced / Redirect page.
Reasons for redirect
Notifications in case of physical connection problems (the ISP's
cable is not connected, an additional device needed to access the
Internet is not connected).
Notifications in case when the device works with default settings.
Notifications in case of problems of the connection used as the
default gateway (authorization error, the IPS's server does not
respond, etc.).
Notifications in case of update of the device's firmware.
Page 136 of 180
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
