Assigning The Ip Address - Siemens SIMATIC HMI Industrial Thin Client ITC1200 Operating Instructions Manual

Assigning device parameters
5.4 Remote configuration of several devices
5.4.4.4

Assigning the IP address

In the "IP" tab, assign new IP addresses for one or more devices.
Note
No connection between client and server
If you change the IP address, an RDP, VNC/Sm@rtServer, or SINUMERIK connection may
be interrupted. Communication between the device and server is then not possible.
IP address conflicts
If you manually assign IP addresses, make sure that different devices do not have the same
IP address. Assign IP addresses that are not yet assigned in the network.
Assign a start address under "Start with IP address" a "Subnet mask" and "Default gateway"
for all selected devices . Use the "Generate IP addresses" button to create a sequential IP
address for each selected device in the order given in the device window. These addresses
appear in the preview window. The "Assign generated IP addresses" button assigns the new
IP addresses to the devices. The network is then automatically scanned again.
76
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02