Table of Contents
Advertisement
Assigning device parameters
5.3 Configuration settings of the device
5.3.5.3
Connection settings
By way of example, the following figure shows the connection settings for an RDP
connection in the Start menu "Configuration > Connections".
You select a client-server connection, or create a new one. The following connection settings
can be specified:
Note
Grayed-out fields
Not all connection settings are available for each type of connection (exception: RDP).
Connection settings that are not required are grayed out.
● The "Connection type" specifies the type of client-server connection, e.g., RDP
● In "Connection name", you enter a name for the client-server connection, e.g., "Server
● In "Description", you enter a text for the client-server connection. This description then
● Under "Server (IP address)", you specify an IP address or host name at which the server
54
connection, VNC connection, etc.
screen 1". The client-server connection will then appear with this name in selection
menus. If the operator selects "Server screen 1" in the taskbar, for example, the client-
server connection configured with this name will be started.
appears in selection menus under "Connection name".
can be reached.
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
Advertisement
Table of Contents
