Installing and connecting the device
3.1
Brief instructions - connecting and starting the device
Procedure
Step
Place the device in the mounting cutout, and fasten the
HMI device with the mounting clamps.
Connect the equipotential bonding.
Connect the power supply.
Connect PROFINET/Ethernet.
Optional: Connect an external USB device.
Switch on the power supply.
Start the Setup wizard and follow the instructions on
the screen.
You can also open the configuration settings from the
taskbar in the "Configuration" Start menu.
Start the required client-server connection.
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
Select the network
connection.
Enter the IP addresses
and further access
parameters of the required
server.
Create a new
administrator password.
Close the dialog with
"Save" or "Exit".
See also
Mounting the device (Page 24)
Connection of equipotential bonding
(Page 27)
Connecting the power supply (Page 29)
Connecting device to the server (Page 30)
Connecting a USB device (Page 31)
Switching on and testing the device
(Page 33)
Structure and functions of the taskbar
(Page 89)
Network settings (Page 46)
Setting up client-server connections
(Page 53)
Password settings (Page 58)
Structure and functions of the taskbar
(Page 89)
3
19