Steps Of Disassembling - XPower X-200AT Series Maintenance Manual

3. Steps of Disassembling

3.1 Unplug Air Mover. (Fig. 6-1)
Turn on the switch to speed 3 to release the electricity of capacitor for 2 minutes, until the voltage
reduces to a safe voltage. (Fig. 6-2) (Note: if there is something wrong with voltage, the electricity of
capacitor cannot release normally. Do not touch live parts directly without insulation tools).
Fig. 6-1
3.2 Use a flat-head screwdriver to pry out the four screw plugs near the handle. (Fig. 7)
3.3 Remove the screws from the housing. (Fig. 8)
Fig. 7
3.4 Remove kick stand. (Fig. 9)
3.5 Remove right housing. (Fig. 10)
Fig. 9
：
Screw
Plug
Fig. 6-2
Fig. 8
Fig. 10
Speed
Switch Knob