Advertisement
Quick Links
Advertisement
Related Manuals for XPower X-600
Summary of Contents for XPower X-600
- Page 1 X-600 / X-600A / X-630 / X-630H P-600 / P-600A / P-630 / P-630H P-630HC...
- Page 3 XPOWER Air Movers are ETL/CETL certified and multifunctional Air Mover with the most efficient engineering design. Features: • Low amp draw with a rated volumn of 2400 to 2800 on High. • Super quiet motor and super lightweight. • Easy carrying handle •...
- Page 4 XPOWER Air Movers are shipped ready-to-use. Prior to Units without “H” can plugging the unit into the power source, inspect completely be stacked (up to 4) for any shipping damage. on their sides. Plug the electrical cord into a standard grounded outlet.
- Page 5 8. Do not allow children to play with an Air Mover at any time. 9. Do not move or carry an Air Mover while unit is operating. 10.An electronic instruction manual can be obtained through manufacturer’s website www.xpower.com.
- Page 6 When not in use, unplug and store the Air Mover in a dry indoor place out of reach of children. Air Mover vibrates...
- Page 7 Model X-600/P-600 X-600A/P-600A X-630/P-630 X-630H/P-630H P-630HC Volt/Frequency 115V, 60Hz 115V, 60Hz 115V, 60Hz 115V, 60Hz 115V, 60Hz Power 1/3 hp 1/3 hp 1/2 hp 1/2 hp 1/2 hp 3.8 A 3.8 A 23.6 lbs/ 21.6 lbs 23.9 lbs Weight 19.8 lbs/ 18.2 lbs 21.5 lbs/19.0 lbs...
- Page 8 XPOWER Service Department. XPOWER to inspect, assess and advise the repairs needed and the applicable cost, if any. For users outside the US, please contact XPOWER Distributor in your country or region for Warranty service and parts replacement. - 7 -...
- Page 9 600-17 Capacitor...
- Page 10 Daisy Chain Specifications (For model X-600A/P-600A ) XPOWER Air Mover Model X-600A/P-600A are daisy chainable with a low 3.8 amp draw. The 12-amp on-board circuit breaker will allow two (2) additional same units to run on one circuit at the same time.
- Page 11 (for “F” models) A set of filters is availale for the XPOWER Air Mover which will help prevent small debris and dust from entering the Air Mover. To clean the filters: remove filters from the unit and wash with warm soapy water, rinse with clean water and let dry thoroughly before reinstalling.
-
Page 12: Warranty Registration
Warranty Registration (for US user only) For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC. Address: 240 Clary Ave., San Gabriel, CA 91776. Tel: 1-855-855-8868 (For your convenience, register your product online at xpower.com) - Page 13 1-855-855-8868...