XPower X-200AT Series Maintenance Manual page 49

Fig. 19-A
X-400 * /P-400 *, X-430 * /P-430 *,
X-600 * /P-600 *, X-630 * /P-630 *
X-800 * /P-800 *, X-830 * /P-830 *
Fig. 20-A
X-400 * /P-400 *, X-430 * /P-430 *,
X-600 * /P-600 *, X-630 * /P-630 *
X-800 * /P-800 *, X-830 * /P-830 *
Fig. 21-A
X-400 * /P-400 *, X-430 * /P-430 *,
X-600 * /P-600 *, X-630 * /P-630 *
X-800 * /P-800 *, X-830 * /P-830 *
Verification Method: turn on the switch to speed 1, 2 and 3, whether the machine and the timer work
normally.
Malfunction 2 – Machine is noisy or vibration occurs
(1) Disassemble Grille Cover. Check that the screws that secure the motor are not loose. If loose, use
Fig. 19-B
X-200 * /P-200 *, X-230 * /P-230 *
Fig. 20-B
X-200 * /P-200 *, X-230 * /P-230 *
Fig. 21-B
X-200 * /P-200 *, X-230 * /P-230 *