2．Wire Diagram; Steps Of Disassembling - XPower X-200AT Series Maintenance Manual

2. Wire Diagram
Fig. 5-1 (X-600*A */P-600*A *，X-630A */P-630A *)
Fig. 5-2 (X-200A * /P-200A *, X-230A * /P-230A */X-400A */P-400A *, X-430A */P-430A *)

3. Steps of Disassembling

：
3.1 Unplug Air Mover (Fig. 6-1)
Turn on the switch to speed 3 to release the electricity of capacitor for 2 minutes, until the voltage
reduces to a safe voltage. (Fig. 6-2) (Note: if there is something wrong with voltage, the electricity of
capacitor cannot release normally. Do not touch live part directly without insulation tools).