Siemens SIMATIC ET 200SP Equipment Manual page 30

Parameters/address space
4.3 Parameter setting
Parity
Data bits
Stop bits
Data flow control
XON character
XOFF character
Wait for XON after XOFF
Activate break detection
Enable diagnostics inter-
rupt
Missing supply voltage L+
Send break before frame
start
Break duration
Send idle line
Duration of the idle line
RTS ON delay
RTS OFF delay
Send up to and including
the end delimiter
30
Parameter
None
•
• Even
• Odd
• Mark: Set parity bit to 1
• Space: Set parity bit to 0
• Any
8 bits
•
• 7 bits
• 1
• 2
• None
• XON/XOFF
• Hardware RTS always ON
• Hardware RTS always ON, ignore DTR/DSR
• Hardware RTS always switched
0...11...FF
0...13...FF
0...20000...65535 ms
Deactivated
•
• Activated
• Deactivated
Activated
•
• Deactivated
• Activated
Deactivated
•
• Activated
0...12...65535 bit times
• Deactivated
• Activated
0...384...65535 bit times
0...65535 ms
0...65535 ms
• Deactivated
• Activated
Value range
CM PtP communications module (6ES7137-6AA01-0BA0)
Equipment Manual, 03/2021, A5E03790792-01
Scope
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel