Phytec phyCORE-i.MX 8M Mini Quick Start Manual

phyCORE -i.MX 8M Mini
®
phyBOARD -Polis / SBC Kit
®
Get your phyCORE-i.MX 8M Mini / SBC Kit powered up and connected
in just a few simple steps.

1 | PREPARING THE HARDWARE

1. Have the included connection cables on hand: a USB-A to USB-B Micro cable,
a standard Ethernet cable and the power adapter (+24 V / 3 A).
2. Connect the power adapter (+24 V DC) to the power supply connector (X33).
3. Connect the USB cable to the Debug FTDI connector (X30) and the host PC.
4. Ensure the boot mode jumpers are set to SD Card (Figure 1).
5. Turn your power supply on.
F igur e 1:
SD Card Boot Configuration
p hy B OA R D - Poli s
®
with phyCORE -i.MX 8M Mini
®
F RO N T
Germany France
PHYTEC Messtechnik GmbH PHYTEC France SARL
D-55129 Mainz F-72140 Sillé le Guillaume
t +49 6131 9221-32 t +33 2 43 29 22 33
f +49 6131 9221-33 f +33 2 43 29 22 34
www.phytec.de www.phytec.fr
www.phytec.eu
USA India
PHYTEC America LLC PHYTEC Embedded Pvt. Ltd.
Bainbridge Island, WA 98110 Bangalore
t +1 206 780 9047 560102
f +1 206 780 9135 t +91 80 40867046
www.phytec.com www.phytec.in
China
PHYTEC Information Technology Co. Ltd.
Nanshan District, Shenzhen
518026 PRC
t +86 755 6180 2110
www.phytec.cn
Kit Contents
phyBOARD-Polis with phyCORE-i.MX 8M Mini
PB-02820-001.A1
Optional Accessories
Display Kit 10"
KPEB-AV-10-100.Ax
B AC K
Quick Quick
Start Start
Guide Guide
Power Adapter +24 V RS-232 Cable
Ethernet Cable USB flash drive
with Virtual Machine
SD Card
USB-A to USB-B
Micro Cable