The "Edit Transponder" Menu Item - Siemens SIMATIC Ident RF360R Configuration Manual

Configuring with the WBM
6.3 The menu items of the WBM
All Syslog messages are displayed in the "Syslog logbook" menu item. This menu item
documents all safety-related access operations to the reader and performed actions. You can
find detailed information on the Syslog messages, their structure and contents in the section
"Syslog messages".
With the "Update" button, you can read in the entries from the reader again and update the
list. The displayed log entries contain 128 KB of data.
6.3.9

The "Edit transponder" menu item

You can read out and write transponder data with the "Edit transponder" menu item.
Figure 6-14 The "Edit transponder" menu item
In the "Read/write" area, you can read out and overwrite the memory areas. You can access
pre-defined addresses (tag fields). Using the parameters, you can adapt the memory area
manually.
Table 6- 22
Parameter
Start address
Length
Data
ASCII
Initialize data
Next to the list of tag fields, the data of the selected memory area is displayed in hexadecimal
format.
64
Description of the parameters of the tag fields
Description
Value of the start address of the data to be read/written.
Value range
Number of bytes to be read/written starting at the start address.
Value range
Input/output fields for the values (hexadecimal).
Possible characters
Showing/hiding the ASCII view.
When the ASCII view is active, the data is shown additionally in ASCII
notation. You can edit the data both in the HEX format or in the ASCII
format.
You can choose between the two input modes "Overwrite" and "Insert".
Show/hide the view for initializing the data.
Using the initialization function, you can preset the data fields.
0 ... 65535
1 ... 1024 bytes
0 ... 9, A ... F
Configuration Manual, 03/2022, C79000-G8976-C629-02
SIMATIC RF360R