Siemens SIMATIC Ident RF360R Configuration Manual page 50

Configuring with the WBM
6.3 The menu items of the WBM
The "PLC" tab
The "PLC" tab is divided into the following area:
• PLC basic settings
Figure 6-7 The "Settings - Communication" menu item, "PLC" tab
PLC basic settings
In the "PLC basic settings" area, you can define which interfaces may be used for
communication with the controller.
Table 6- 11
Parameter
PROFINET IO interface
EtherNet/IP interface
50
Description of the PLC basic parameters
Description
In this area, you can define whether the reader may be accessed via the
controller (STEP 7). With this setting, the Ethernet interface is closed for
communication with the controller.
In this area, you can specify if it allowed to access the reader via
EtherNet/IP. With this setting, the Ethernet interface is closed for
EtherNet/IP communication with the controller.
Configuration Manual, 03/2022, C79000-G8976-C629-02
SIMATIC RF360R