Table of Contents
Advertisement
2.2.2
Soldering IC Socket
After fastening, solder the IC socket for an FP-128 package to the user system. Be sure to completely
solder the leads so that the solder slops gently over the leads and forms solder fillets. (Use slightly
more solder than the MCU.)
2.2.3
Inserting Cable Head
Check the location of pin 1 before inserting.
Align pin 1 on the IC socket for an FP-128 package on the user system with pin 1 on the user system
interface cable head, and insert the user system interface cable head into the IC socket on the user
system, as shown in figure 4.
Figure 3 Location Setting of IC Socket
CAUTION
7
Advertisement
Table of Contents
