When The Printer And Your Smartphone Are Already; Connected - FujiFilm instax square Link User Manual

11
Tap or swipe the image up on the screen to print
your image�
After a slight transmission delay (roughly 12 seconds), the
printer starts printing.
You can also select the number of images to print during
image transfer.
12
When your photo has been ejected (the printer
stops making a sound), take it out of the printer by
grasping the edge of the photo� Your instant photo
will develop in roughly 90 seconds�
Confirm the number of images remaining in your loaded
INSTAX SQUARE instant film pack on the Smartphone App
screen.
9

When the Printer and Your Smartphone Are Already

Connected

1
Press and hold the Power button for approximately
1 second to turn the printer on�
The LED lights up.
2
Start the downloaded INSTAX SQUARE LINK
Smartphone App�
3
You are now ready to use the printer� To select an
image to print, tap the [Simple Print] button on the
home screen and select an image from the photos
on your Smartphone�
To edit your image for printing, click on the below editing
options on the bottom of the screen before printing�
Enters text or attaches a sticker to the printed
image.
Zooms in/out or rotates the printed image.
Applies a filter on the printed image.
Adjusts the brightness of the printed image.