Basic Specifications; Electrical Connector; Binder Serie 623 - GeoSIG AC-23 User Manual

AC-23 Accelerometer User Manual
11.08.2022 / V17

1 Basic Specifications

Sensor Series
Input range
Output range
Frequency range
Protections
Power supply
Current drain

2 Electrical Connector

All the AC-4x accelerometers are supplied as standard with a 2 m connection cable. Based on the intended
use, the 12 pin metallic style connectors will be supplied in one of the following options: Binder Serie 623 or
Binder Serie 423.
2.1

Binder Serie 623

Cable gland nut has to be determined as per cable external diameter and must be separately ordered. It has
also to provide the cable shield connection to connector case.
AC-23
Acceleration, ±0.2, ±0.5, ±1.0 g, ±2.0 g or ±4.0 g
0 ± 10 Volt differential output OR
0 ± 5 Volt differential output OR
2.5 ± 2.5 Volt single-ended output OR
0 – 20 mA Current-loop (OPTION)
from 0.1 Hz to 100 Hz
(optional 200 Hz)
All connectors pins protected by Transzorb diodes and VDR
10 – 15 VDC
Average 90 mA @ 15 VDC
GeoSIG
Binder Serie 623
Figure 1, Binder Serie 623 Connector
P/N #J_CIR.012.002.F
P/N 99 4622 00 12
4 / 15
GS_AC-23_UserManual_V17