Indication - Mindeo ES920 User Manual

3-7 Indication

Power on alert: After power-on the embedded scanner will generate an alert signal to indicate a
successful self-test.
Beeper indication: After each successful reading, the embedded scanner will beep to indicate a good
barcode reading, and its beep tone duration is adjustable.
Beep tone duration: This parameter can be adjusted for a good reading upon favorite usage.
Volume of beeper: This parameter can be adjusted for different level of the volume of the beeper.
Beep on BEL Character: The embedded scanner will beep upon a <BEL> (0x07) character from the
host if it is enabled.
Option barcode
Power on alert
Beeper indication
Beep tone duration
Volume of beeper
Beep on BEL Character
Multiple-scan setting
Option
Disable
Enable
Disable
Enable
01-09 (10 ms )
Low
Middle
High
Disable
Enable
Alpha. entry
00
01*
00
01*
01-09
05*
00
01
02*
00
01*
31
Single-scan setting
*
*
*
*
*