Mindeo ES920 User Manual page 89

The linear component will be a traditional symbol of types: GS-128, EAN-8, EAN-13, UPC-A, UPC-E or
DataBar.
The composite component will be either a CC-A (encoding up to 56 digits), a CC-B (up to 338 digits) or a
CC-C (up to 2361 digits).
GS1-128 Composite
GS1 DataBar Expanded Stacked Composite
UPC-E Composite
GS1 composite version enabled:

Note 1- While this feature is enabled, the decode speed will be dropped. The more versions are
enabled, the more obvious influence.

Note 2- If the corresponding linear 1D barcode symbol is set disable, only 2D composite data will be
output after a success decode.

Note 3- While this feature is set disable, if the corresponding linear 1D barcode symbol is set enable,
only 1D data will be output after a success decode.

Note 4- For UPC/EAN Composite, if 2D composite component is failed to decode and 1D linear
component is successful to decode, then only 1D data will be output.

Note 5- If both GS-128 and DataBar Composite are set Enable, both 1D and 2D components must
be successfully decoded to output both 1D and 2D data.
GS1-128 Composite, DataBar Composite - Two versions of GS1 Composite symbol are enabled.
GS1-128 Composite, DataBar Composite, UPC/EAN Composite - Three versions of GS1 Composite
symbol are enabled.
GS1 DataBar Stacked Composite
GS1 DataBar Composite
EAN-13 Composite
83