Table of Contents
Advertisement
3-7 Indication for handheld unit
Power on alert: After power-on the scanner will generate an alert signal to indicate a successful self-test.
LED indication: After each successful reading, the LED above the scanner will light up to indicate a good
barcode reading.
Beeper indication: After each successful reading, the scanner will beep to indicate a good barcode
reading, and its beep tone duration is adjustable.
Beep tone duration: This parameter can be adjusted for a good reading upon favorite usage.
Volume of beeper: This parameter can be adjusted for different level of the volume of the beeper.
Vibration: After each successful reading, the vibrator will vibrate to indicate a good barcode reading.
Option bar code
Power on alert
LED indication
Beeper indication
Beep tone duration
Volume of beeper
Vibration indication
SETUP
Disable
Enable
Disable
Enable
Disable
Enable
01-09 (10 ms )
Low
Middle
High
Disable
Enable
END
Option
Alpha. entry
00*
01
00
01*
00
01*
01-09
05*
00
01
02*
00
01*
36
Single-scan setting
*
*
*
*
*
*
Hide quick links:
Advertisement
Table of Contents
