Mindeo ES920 User Manual page 32

store the data while continue-scanning. The scanner will output the data after the predefined delay
elapsed. The maximum storage of data is 1000 characters. If this parameter is set to be "00", the scanner
will not store data. And if the parameter is set to be "FF", the scanner will output data after stopping
scanning.
Character encoding system: A character encoding system consists of a code that pairs each character
from a given repertoire. Common examples include Morse code, the Baudot code, the ASCII and Unicode.
If the data received does not display with the proper characters (domestic language, e.g. Chinese), it
maybe because the barcode being scanned was created using a character encoding system that is
different from the one the host program is expecting. Try alternate options to find the proper one.
Complete data output before next decode attempt: This setting is active only when USB device type
is set as "HID keyboard" or "HID keyboard for Apple Mac". If it is enabled, the scanner will not start next
decode attempt until previous data output is completed.
Sleep mode: If it is enabled, the scanner will go to sleep when no code is successful decoded after the
Sleep mode delay elapsed.
Sleep mode delay: When no code is successful decoded beyond this time, the scanner will go to sleep.
26