Siemens SINAMICS S220 Equipment Manual page 82

Accessories
6.1 DC link adapter
Required tools:
• Torx T10 screwdriver to attach the adapter
• Torx screwdriver T20 for DC link screws (Torx slot)
• Pliers for knocking out the cutouts
Table 6-4 Mounting the 72 A DC link adapter
1. Engage the DC link adapter in the
grille.
4. Fasten the DC link adapter using the
associated screw provided in the acces‐
sories pack (Torx 10; 0.8 Nm / 7 lbf-in).
80
2. Press it down.
5. Break out the cutout in the protective
flap.
3. Fasten the adapter busbars using the
M4x20 screws (Torx 20; 1.8 Nm / 16 lbf-
in) that were previously removed.
Mounted DC link adapter with closed
protective flap.
Equipment Manual, 01/2022, 6SL3097-6AC30-0BP0
Booksize power units