4. Insert the connecting cables into the center of the shield connection clamp. Hook the shield
connection clamp into the slits of the shield connection plate.
Position of the shield connection clamp:
5. To fix the connecting cables, tighten the pressure plates of the shield connection clamps
using the knurled screws.
– The tightening torques are listed in the table above.
– When doing this, carefully ensure that the connecting cable is positioned at the center of
Booksize power units
Equipment Manual, 01/2022, 6SL3097-6AC30-0BP0
①
Phoenix SK35 (8WH9130-0PA00)
②
Phoenix SK28 (8WH9130-0NA00)
the clamp.
6.2 Accessories for Smart Line Modules
Accessories
99