Example; User-Selectable Features; Adding New Remote Controls - Clifford Concept ACE 300 Owner's Manual

# of
Factory
Feature flicks &
setting
chirps
Add a new
remote to
channel 3 15
—
(silent
arm/disarm)
Add a new
remote to
channel 4
16
—
(optional
remote
accessory)
Add a new
remote to
channel 5 17
—
(remote
valet mode)
Erase all
19
—
channels
Example : To change the AutoArming feature from its factory
setting of "on" to "off," you would do the following:
Turn the ignition key to the ON position.
Flick the valet switch back and forth 4 times (you'll hear a chirp each
time to help you count to the total of 4 chirps).
Wait 3 seconds. The system will sound one more chirp to confirm
that the AutoArming setting is now off (1 chirp = off, 2 chirps = on).
Turn the ignition off. That's all there is to it! To change the

Adding new remote controls

For other drivers in your family, or if you wish to control Clifford systems on your
other cars with the same remote control, you can buy additional remote controls
from any Clifford Dealer and program them into the system yourself. Each ACE
300 will respond to as many as four 12-channel ACG remote controls. To add a new
remote control to the system, use the procedures noted in the User-selectable
features section on pages 13-14.
Secondary
completion
action
confirmation
Press remote control button 3
Press remote control button 4
Press the side LevelShift
button once, then press
button 1
—
14
Program
Result
Button 3/channel 3 code of
3 chirps the new remote control
has been memorized
Button 4/channel 4 code
4 chirps of the new remote control
has been memorized
Button 1/channel 5 code
5 chirps of the new remote control
has been memorized
All remote control codes
2 chirps have been erased; program
in new remote control(s)