Enhanced Autoarming; Autoarming Enable/Disable; Autoarm & Lock; Instant Autoarming Bypass - Clifford Concept ACE 300 Owner's Manual

Enhanced AutoArming™

If this feature is enabled and you forget to remotely arm, ACE 300 automatically arms
itself 30 seconds after the doors are closed. For your convenience, if you re-open any
door(s) within the 30-second countdown, AutoArming will restart from the beginning
once all doors are closed. ACE 300 has these additional AutoArming features:

AutoArming enable/disable:

the AutoArming feature. See User-selectable features on pages 13-14.
To ensure you can't accidentally lock your keys inside the
AutoArm & Lock:
car, the system is factory-set not to lock the doors upon AutoArming. To
change this setting, see User-selectable features on pages 13-14.

Instant AutoArming bypass:

and other times when you wish to temporarily bypass AutoArming. To do so,
rapidly turn the ignition switch to "ON" then "OFF" twice. You will hear a
single siren chirp to confirm that the system will not AutoArm. Your ACE
300 will revert to its normal operating mode when you next start the engine.

Valet mode

Whenever the system is put in valet mode, all of the system's security features are
switched off. At various times, you will need to turn the system off. For instance,
when having your car serviced, washed or parked by a valet.
NOTE: If you temporarily lose the use of your remote controls, you can disarm
the system by enabling valet mode.

To enable valet mode

1. Turn the ignition switch to its "ON" position or start the engine.
2. Flip the valet switch. The system's LED will glow for on-going confirmation.

To exit valet mode

1. Turn the ignition switch to its "ON" position or start the engine.
2. Flip the valet switch. The system's LED will turn off to confirm that the system
is in its normal operating mode.

Remote controlled valet mode entry and exit

You can remotely enable or exit valet mode via your remote control. Just transmit
channel 5 (one press of the side LevelShift button, then button 1). In addition to the
previously noted indications, two parking light flashes will confirm that you have
remotely enabled valet mode, while a single flash confirms exiting of valet mode.

Keyless entry in valet mode

Even in valet mode, you can still remotely convenience features. Press button 1 as if
disarming and the doors will unlock (indicated by one parking light flash) and the
interior light will turn on. Press button 1 again and the doors lock (two flashes).
If you prefer, you may deactivate or reactivate
Prevents AutoArming when fueling the vehicle
9