Advertisement
SECTION 5:
SPOTTING AND SET UP – DRAIN AND SEWER CLEANING (Cont'd)
Hino Engagement Procedure
a) With engine at idle & park brake secure, ensure neutral is
selected
b) Check air pressure is at 600 kPa before proceeding
c) Turn system power switch to 'On' – Yellow Switch –
d) Turn PTO work mode switch to 'On' – Red Switch
e)
Wait 5
f) The system is fully functional after the engine speed has settled at
900rpm
The "EXTRACTOR" – Series 4 Model DCS4660T
TRUCK MOUNTED COMBINATION JET/VAC SYSTEM
Designed and Manufactured by DCS Manufacturing Pty Ltd
OPERATING INSTRUCTIONS
seconds, then select 'OD' on Auto Gear
- 5 -
Wait 20 seconds
Section 5
Advertisement
