Advertisement
Quick Links
The "EXTRACTOR" – Series 4 Model DCS4660T
TRUCK MOUNTED COMBINATION JET/VAC SYSTEM
Designed and Manufactured by DCS Manufacturing Pty Ltd
SECTION 5:
OPERATING INSTRUCTIONS
WARNING
NEVER USE ANY JETTING ATTACHMENTS
ABOVE GROUND, THIS CAN RESULT IN
SERIOUS INJURY OR DEATH
JETTING ATTACHMENTS MUST BE
CORRECTLY INSERTED IN PIPE
OR CULVERT BEFORE ENGAGING
WATER PUMP
- 1 -
Section 5
Advertisement
Summary of Contents for DCS EXTRACTOR Series
- Page 1 The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS WARNING NEVER USE ANY JETTING ATTACHMENTS ABOVE GROUND, THIS CAN RESULT IN SERIOUS INJURY OR DEATH...
-
Page 2: Daily Maintenance
The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS GENERAL It is important that the operator is fully trained in the operation and functions of the “Extractor”... - Page 3 The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS USEFUL HINT It can be of assistance if you carry some quantities of lubrication to suit water and vacuum pumps and hydraulic oil, along with a grease gun for top-ups or emergencies when on site.
- Page 4 The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS SPOTTING AND SET UP – DRAIN AND SEWER CLEANING (Cont’d) Turn hydrant “on” and when water tank is approximately ¼ to ½ full return to truck cabin to engage system.
- Page 5 The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS SPOTTING AND SET UP – DRAIN AND SEWER CLEANING (Cont’d) Hino Engagement Procedure a) With engine at idle & park brake secure, ensure neutral is...
- Page 6 The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS SETTING TO WORK – DRAIN AND SEWER CLEANING (Cont’d) Remove pendant station from storage and plug pendant end into socket adaptor positioned inside the main control panel on the left-hand side of the truck.
- Page 7 The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS SETTING TO WORK – DRAIN AND SEWER CLEANING (Cont’d) Pay out additional hose to allow nozzle to be inserted approximately 500- 700mm into pipe entry point.
- Page 8 The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS SETTING TO WORK – DRAIN AND SEWER CLEANING (Cont’d) Take care when feeding hose out that hose tension is maintained, hose speed may require adjustment if play out is slower than the reel speed.
- Page 9 The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS SETTING TO WORK – DRAIN AND SEWER CLEANING (Cont’d) Carefully watch hose withdrawal and if hose stops it will indicate the nozzle is caught on a drop or misaligned pipe.
- Page 10 The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS SETTING TO WORK – DRAIN AND SEWER CLEANING (Cont’d) Hino Disengagement Procedure (Allison 3200 Series Transmission) a) With engine at idle, select ‘N’...
- Page 11 The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS SETTING TO WORK – DRAIN AND SEWER CLEANING (Cont’d) Check collector body debris level and if not requiring emptying move to next location.
-
Page 12: Unloading Procedure
The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS SHUT DOWN The Extractor has built-in shut-down systems on high debris body level and low water level as well as emergency stop function. -
Page 13: Operation
The “EXTRACTOR” – Series 4 Model DCS4660T TRUCK MOUNTED COMBINATION JET/VAC SYSTEM Designed and Manufactured by DCS Manufacturing Pty Ltd SECTION 5: OPERATING INSTRUCTIONS UNLOADING PROCEDURE CONT’D Proceed to main control panel on left hand side Follow the unloading procedure, NOTE: On tipping model if “EXCESSIVE WATER”...