(3) Close the air filter in the reverse order for removing. (Refer to Fig. 25)
(2)
Decoration
panel
Tab
6. INSTALLATION OF THE SUCTION PANEL
Install the suction panel.
1) Remove the tape fixing the fall-preventing wire at both sides of the suction panel.
2) Hold the suction panel at 45° tilted position and hook the suction panel to the hooking pin of the decoration
panel. (Refer to Fig. 4 on page 2)
3) Hook the fall-preventing wire on both sides of the suction panel to the hole of the decoration panel.
(Refer to Fig. 26)
4) Hook the opposite side of the suction panel to the hooking pin in the reverse order for removing.
2) Hooking
pin
11
Air filter
Air filter
Hooking part
Fig. 25
Hole
3) Fall-preventing wire
(3)
Fig. 26
Decoration panel
Tab
Hooking part
Air filter
4) Hooking
pin
English