Advertisement
SMART AirLiner Tips and Tricks
Setting Up Your Airliner for Use
In order for your device to work, the Bluetooth dongle must
be plugged in to your computer.
You will then see the Bluetooth Icon appear in your system
tray.
On the Airliner, click the power button in the upper left corner and the
black "connect" button on the back of the airliner. The Airliner power
button should begin to blink.
RIGHT Click on the Bluetooth Icon and select "Show Bluetooth Devices.
"
Click on the "SMART Wireless Slate" Icon and then click "Add." If
the icon for SMART Wireless Slate does not appear, go ahead and
click Add anyway.
The Bluetooth Device Wizard will appear. Check t
he
box next to "My device is set up and ready to be
found." And then click "Next."
Advertisement
Table of Contents
Related Manuals for SMART AirLiner WS100
Summary of Contents for SMART AirLiner WS100
- Page 1 RIGHT Click on the Bluetooth Icon and select “Show Bluetooth Devices. “ Click on the “SMART Wireless Slate” Icon and then click “Add.” If the icon for SMART Wireless Slate does not appear, go ahead and click Add anyway.
- Page 2 Click on the “SMART Wireless Slate” Icon and click “Next.” Click “Don’t use a passkey” and then click “Next.” Click “Finish”. Now you are ready to use your SMART AirLiner!!
- Page 3 You can continue to use the slate while the battery is recharging. Cleaning the Slate Regularly clean your AirLiner WS100 wireless slate with a soft, damp cloth to remove dust and dirt particles. If necessary, dampen the cloth using very mild soap that is diluted with water. Register Your AirLiner It is important that you register your AirLiner so you can receive technical support.
Need help?
Do you have a question about the AirLiner WS100 and is the answer not in the manual?
Questions and answers