Saving Of Adjustment Results; Check After Adjustment; Preparation Of Check; Burst Level Check - Sony Ipela ExwavePRO SNC-CS20 Service Manual

2-2-12. Saving of Adjustment Results

1. Press the [Save] button.
SNC_DS20
2. Check that "OK" is displayed in the upper right area of
the window, and then click the [Finish] button.
SNC_DS20
3. After checking that the display returned to the startup
window, turn off the power of this unit.
SNC-CS20/CM120

2-3. Check after Adjustment

2-3-1. Preparation of Check

1. After adjustment is completed, turn off the power of
this unit once, and then restart it.
2. After this unit is restarted, press the [VIDEO|OUT]
button several times and check that the image is output
on the video monitor.

2-3-2. Burst Level Check

1. Shoot an arbitrary subject and check that the Burst
level meets the specification.
. Subject:
. Measuring equipment: Waveform monitor
. Specification:

2-3-3. Video Level Check

1. Shoot the pattern box and check that the Video Level
meets the specification.
. Subject:
. Measuring equipment: Waveform monitor
. Specification:
2-3-4. Color Reproduction Adjustment
Check
1. Shoot the pattern box and check that the following
specification is met.
. Subject:
. Measuring equipment: Vectorscope
. Specification:
None
NTSC: 40 ± 2 (IRE)
280 ± 14 (mV)
PAL:
Clear chart
NTSC: 65 ± 5 (IRE)
455 ± 35 (mV)
PAL:
Color-bar chart
All luminescent spots should
stay within the large frame
of the vectorscope scale.
2-11