Firmware Upgrade Error Management - HMS Networks Anybus Communicator ABC4018 User Manual

Firmware Upgrade Error Management

10.3. Firmware Upgrade Error Management
If the firmware update process is interrupted or if the power is lost during the update process, the
Communicator goes into fallback mode.
The last working firmware is still available on the flash, but it is not active.
Procedure
To complete the interrupted firmware update:
1. Disconnect the Communicator from power.
Figure 49. Disconnect power
2. Reconnect the Communicator to power.
Figure 50. Reconnect power
SCM-1202-201 Version 1.0
® ™
Anybus Communicator - Modbus TCP Server to PROFIBUS DP Device
Page 55 of 60