Connect To Modbus Tcp Network - HMS Networks Anybus Communicator ABC4018 User Manual

® ™
Anybus Communicator - Modbus TCP Server to PROFIBUS DP Device

5.3. Connect to Modbus TCP Network

Figure 5. Connect to Modbus TCP network
1. Connect the Communicator, upper connector, to your Modbus TCP network.
EtherNet/IP Connector
To Do Next
Connect the Communicator to the PROFIBUS network, set the node address on the rotary switches and connect
to power.
Check LED status, refer to Communicator LED
Page 10 of 60
Pin
1
2
3
4
5
6
7
8
Indicators.
Connect to Modbus TCP Network
Description
TD+
TD-
RD+
Not used
Not used
RD-
Not used
Not used
SCM-1202-201 Version 1.0