HMS Networks Anybus Communicator ABC4018 User Manual page 33

Modbus TCP Settings
To Configure IP Settings Manually
Figure 18. Modbus TCP IP Settings, DCHP disabled
1. Deselect the DHCP enabled checkbox.
2. Configure the IP settings.
Setting Description
IP address The Modbus TCP network IP address in IPv4 dot-decimal notation
Subnet mask The Modbus TCP network Subnet mask in IPv4 dot-decimal notation.
Gateway address The Modbus TCP network Gateway address in IPv4 dot-decimal notation.
If there is no gateway available, set the Gateway address to: 0.0.0.0
Primary DNS server The Modbus TCP network Primary DNS in IPv4 dot-decimal notation.
Secondary DNS server The Modbus TCP network Secondary DNS in IPv4 dot-decimal notation.
DHCP Enabled
If you change a value and click Refresh, the value is reset to the last applied value.
SCM-1202-201 Version 1.0
® ™
Anybus Communicator - Modbus TCP Server to PROFIBUS DP Device
Page 29 of 60