HMS Networks Anybus Communicator ABC4018 User Manual page 20

® ™
Anybus Communicator - Modbus TCP Server to PROFIBUS DP Device
To Do Next
Connect the Communicator to power. See
Figure 9. Connect Communicator to power
Result
The set node address is active as soon as the Communicator is powered on.
NOTE
Changing the address settings on the rotary switches during operation is ignored. For a new address
to take effect, power cycle the Communicator.
Page 16 of 60
Connect to Power (page 17).
Rotary Switch Settings
SCM-1202-201 Version 1.0