Replacing the bulb for the fog light
Fig. 192 Removing the fog lamp / changing bulb for fog light switch
Read and observe
and
on page 186 first.
Remove the protective grille and headlight
›
Insert the clamps for removing the full wheel covers into opening
» page
168, Vehicle tool kit.
›
Loosen the protective grille by pulling the hook in the direction of arrow
» Fig.
192.
›
Grasp the guard with the hand and remove by pulling in the direction of the
arrow
.
2
›
Unscrew the screws
with the screwdriver from the tool kit
B
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Push in the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Turn the socket with the bulb to the stop in the direction of the arrow
›
Remove the socket with the bulb in the direction of arrow
›
Insert the new bulb into the headlight and turn counter to the direction of
arrow
as far as the stop.
6
All manuals and user guides at all-guides.com
A
1
» page
168.
.
3
» Fig.
192.
4
.
5
.
6
.
7
›
Attach the connector.
Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 192
and tightening.
›
Insert the protective grille and carefully press it in.
The protective grille must engage firmly.
Changing the licence plate light bulb
Fig. 194 Remove the cover / replace the bulb
Read and observe
and
on page 186 first.
›
Open the tailgate.
›
Push in the lamp in the direction of the arrow
The lamp comes loose.
›
Swivel out the lamp in the direction of the arrow
›
Remove the cap of the lamp in range
» Fig.
194.
Fig. 193
Remove the licence plate light
» Fig.
193.
1
and remove it.
2
and in the direction of arrow
A
3
Fuses and light bulbs
3
191