43/70
14.2
DISPLAY ADAPTER DA20
14.3
ANTENNAS
14.4
POWER SUPPLY
• CLIP (Call Line Identification Protocol)
FI12 Size: Height 132mm, width 99mm, depth 34 mm
FI12 Weight: 208 grams
The FCT display -DA20- is easy to install: simply plug it in
into the telephone line in the most suitable place and you will
benefit from the following features:
• FCT phone line direct feeding
•
FCT real-time status indication: operator's name, radio
signal...
• Manual time-setting
•
Calling Line Identification (CLI)
•
Storage of incoming calls
•
SMS
received
functionality for pre-paid subscribers)
In areas where coverage is poor, the following accessory
antenna can be used to enhance the FCT performance:
• External triple omnidirectional antenna. For installation
or in places where indoor coverage is unstable. Band: dual
900/1800/1900 MHz. Gain: 2bBi. Cable: 3m. Connector:
SMA male.
• Outdoor directional antenna. The directional antenna is
intended to be wall mounted by means of a bracket. It
provides with the maximum gain among the whole range
of antennas for the FCT. Band: 900 MHz. Gain: 10bBi.
Cable: 7.5 m. Connector: SMA male.
display
and
storage
(Very
useful