Voice Mail; Sending Tone Signals - Ericsson F251m User Manual

31/70
To manage the
phonebook in ...
SIM card memory
FCT memory
11.6

VOICE MAIL

11.7

SENDING TONE SIGNALS

Warning!: Pos has to have two digits always. For example,
memory position number 1 has Pos=01
With Dial ...
Function ...
Store **51*Pos*Phone_number#
Delete #51*Pos#
Check position *#51*Pos*Phone_number#
Dial Pos#
Store **51*Pos*Phone_number*1#
Delete #51*Pos*1#
Check position *#51*Pos*Phone_number*1#
Dial Pos*
Note: if instead of hearing beeps you hear a loud and low tone,
this means that there has been an error in the activation or
deactivation
The answering service of your network allows callers to leave
a voice message when you cannot answer your calls.
If you have voice mail, you will hear 3 beeps before the dial
tone, as soon as you pick up the receiver to make a call.
Note: if you have the DA20 display adapter accessory (See
"FCT accessories" on page 41), a
you have voice mail.
Call your voice mail number in order to receive the voice mail
message.
You will hear...
1 beep
3 beeps
1 beep if memorized
3 beeps
memorized
Dialing ...
1 beep
3 beeps
1 beep if memorized
3 beeps
memorized
Dialing ...
icon will show when
if not
if not