Table of Contents
Advertisement
Operating the appliance
en
Adding laundry
After starting the programme, you can
add or remove laundry if necessary.
Press the Ü button to do this.
The Ü button indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
It is possible to add laundry when
Pause: Reload is possible appears on
the display.
To continue the programme, press the
Ü button. The programme continues
automatically.
Notes
Do not leave the door open for too
■
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
■
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Follow the information on the display
panel.
The load display is not active during
■
reloading.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
Press the Ü button.
1.
Select another programme.
2.
Press the Ü button. The new
3.
programme starts from the
beginning.
Cancel the programme
For programmes at high temperatures:
Press the Ü button.
1.
To cool down laundry:
2.
Select Rinse / Freshen Up .
Press the Ü button.
3.
30
For programmes at low temperatures:
Press the Ü button.
1.
Select Spin or Drain .
2.
Press the Ü button.
3.
Programme end during rinse
hold
The following appears on the display
panel:
Continue the programme by:
Select the Spin (change the spin
■
speed if necessary) or the Drain
programme.
Press the Ü button.
■
Programme end
Ï Finished, remove washing appears
on the display panel. The Ü button
indicator lamp is off.
Removing laundry/switching
off the appliance
Open the loading door and remove
1.
the laundry. Follow the information
on the display panel.
Press the # button. The appliance is
2.
switched off.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Advertisement
Table of Contents
